The TRASSIR CMS connection procedure depends on the device type and manufacturer. TRASSIR CMS supports three connection types:
-
PUSH-connection. This connection suits for integrated into TRASSIR CMS cameras, video recorders and servers. TRASSIR CMS initiates this connection under one of the following instructions:
-
PULL-connection. This connection suits for non-integrated into TRASSIR CMS cameras and video recorders. In this case the device initiates the connection to TRASSIR CMS. You can read the description of the connection procedure in the connected device guideline.
-
RTSP. This type of connection suits for all video surveillance devices that support data transfer via RTSP protocol. The connection establishes under the following instruction:
