TRASSIR Access Control access points, which provide employees entry and exit to the protected area, are displayed in the objects tree.
Right-click on the access point and, in the opened context menu, you can:
- Show on monitor - display video from the channel associated with this access point on the operator's screen.
- Workmode always open - allow free entry at this access point.
- Workmode always close - forbid any entry to this access point, including via authentication means.
- Grant access once - allow a single free pass through the access point. After the pass, the Access Point Allows By Key mode will be activated on this access point.
- Access Point Allows By Key - set the mode specified in the access point settings.
Tip
Using tree objects filters you can configure to display certain access points or show malfunctioning devices.
